Melbe Daily Care Set — K-beauty Bubble Toner & Serum Duo

Glass skin in two steps

The Melbe Daily Care Set pairs the two products Korean routines lean on first thing in the morning and last thing at night: a hydrating Pop Bubble Toner to prep and balance the skin, and Meriquid — a lightweight essence-serum that delivers concentrated actives once the skin is primed. The "glass skin" look so many K-beauty fans chase isn't one miracle product; it's layering. Toner first to flood the skin with water-light hydration and lower the texture, then a serum to seal in actives where they can actually work. This duo gives you that exact two-step ritual in a single set, formulated to work together rather than as two products that happen to share a shelf.

Step 1 — Pop Bubble Toner

A toner does the unglamorous but essential job: it removes the last traces of cleanser and hard-water residue, re-balances the skin's pH after washing, and leaves a thin film of hydration that helps everything you apply next absorb better. The Pop Bubble Toner uses a light, bubbling water-gel texture that feels refreshing rather than tacky. Swept across the face it preps the surface so the serum that follows isn't fighting a dry, tight barrier. Used alone it's a fast hydration top-up; used as step one it makes step two noticeably more effective.

Step 2 — Meriquid

Meriquid is the concentrated half of the set, a cushiony moisture step built around the fermentation chemistry Korean skincare has refined for two decades. Fermented actives (rice, soybean, bifida, lactobacillus and lactococcus ferments) are broken down into smaller molecules that cross the skin barrier more easily than their unfermented forms, so more of the good stuff reaches the layers where it matters instead of sitting on top until you wash it off. Ceramide NP, centella (cica) and a layered hyaluronic-acid complex round it out for barrier support and lasting hydration. Pressed onto toner-damp skin, it layers cleanly under moisturiser or SPF.

What's in the set

Component	Role in the routine
Pop Bubble Toner	Hydrating prep step — balances, softens, boosts absorption
Meriquid	Cushiony moisture step — fermented actives, ceramide and hyaluronic acid for barrier support and glow

Key ingredients

• Niacinamide — supports a brighter, more even tone (in both products)
• Hyaluronic acid complex (sodium hyaluronate, hyaluronic acid, hydrolysed hyaluronic acid) — binds water at multiple skin depths for plump hydration
• Panthenol (provitamin B5) — soothes and supports the barrier (Pop Bubble Toner)
• Fermented actives (rice, soybean, bifida, lactobacillus, lactococcus ferments) — gentler, more bio-available delivery
• Ceramide NP & centella (cica) — barrier support and soothing (Meriquid)
• Adenosine & allantoin — comfort and a smoother-looking finish

Full ingredients (INCI)

Pop Bubble Toner

Water, Pentylene Glycol, Glycerin, Methylpropanediol, Glycereth-26, 1,2-Hexanediol, Erythritol, Niacinamide, C12-14 Pareth-12, Panthenol, Monascus/Rice Ferment Filtrate, Allantoin, Adenosine, Disodium EDTA, Arginine, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Propanediol, Bacillus/Soybean Ferment Extract, Aureobasidium Pullulans Ferment, Benzyl Glycol, Ethylhexylglycerin, Hydrolyzed Glycosaminoglycans, Sodium Hyaluronate, Hydrolyzed Collagen, Natto Gum, Sodium Hyaluronate Crosspolymer, Hydrolyzed Hyaluronic Acid, Raspberry Ketone, Hydroxypropyltrimonium Hyaluronate, Hyaluronic Acid, Sodium Acetylated Hyaluronate, Fragrance (Parfum)

Meriquid

Water, Glycerin, Dipropylene Glycol, 1,2-Hexanediol, Niacinamide, Caprylic/Capric Triglyceride, Squalane, Bis-Ethoxydiglycol Cyclohexane 1,4-Dicarboxylate, Polyglyceryl-10 Laurate, Aloe Barbadensis Leaf Extract, Cetearyl Alcohol, Glyceryl Polyacrylate, Propanediol, Ammonium Acryloyldimethyltaurate/VP Copolymer, Butylene Glycol, Betaine, Glycereth-26, Glucose, Helianthus Annuus (Sunflower) Seed Oil, Hydrogenated Lecithin, Allantoin, Raffinose, Adenosine, Hippophae Rhamnoides (Sea Buckthorn) Fruit Extract, Hibiscus Mutabilis Flower Extract, Disodium EDTA, Ceramide NP, Bacillus/Soybean Ferment Extract, Salicornia Herbacea Extract, Phragmites Communis Extract, Sodium Hyaluronate, Phytosphingosine, Totarol, Centella Asiatica Extract, Lactobacillus Ferment Lysate, Pentylene Glycol, Ceratonia Siliqua (Carob) Seed Extract, Pueraria Lobata (Kudzu) Root Extract, Dioscorea Japonica Root Extract, Canavalia Gladiata Seed Extract, Viola Mandshurica Flower Extract, Bifida Ferment Lysate, Lens Esculenta (Lentil) Extract, Lactococcus Ferment Lysate, Glycine Soja (Wild Soybean) Sprout Extract, Ulmus Davidiana Root Extract, Laminaria Japonica Extract, Phaseolus Radiatus Seed Extract, Benzyl Glycol, Hydrolyzed Glycosaminoglycans, Ethylhexylglycerin, Sodium Hyaluronate Crosspolymer, Hydrolyzed Hyaluronic Acid, Raspberry Ketone, Hydroxypropyltrimonium Hyaluronate, Hyaluronic Acid, Sodium Acetylated Hyaluronate, Fragrance (Parfum)

How to use

1. Cleanse as usual, morning and evening
2. Sweep the Pop Bubble Toner across the face with hands or a cotton pad
3. While skin is still slightly damp, press 2–3 drops of Meriquid into the face — do not rub
4. Allow 60 seconds to absorb, then layer your moisturiser
5. Finish every morning with SPF — well-hydrated skin still needs UV protection

Who it's for

• Anyone chasing the dewy, even, "glass skin" finish without a ten-step routine
• Dry or dull skin that drinks up hydration and still looks tight by midday
• K-beauty beginners who want a ready-made toner-then-serum starting point
• Mature skin looking to add fermented actives and barrier ingredients to a simple daily ritual

Specs

Set contents	Pop Bubble Toner + Meriquid essence-serum
Routine	Two-step daily — AM and PM
Skin type	All skin types — especially dry, dull, or dehydrated
Texture	Light water-gel toner; fast-absorbing essence-serum
Brand	Melbe
Country of origin	South Korea

Shipping & delivery

Ships from South Korea via express international courier. Estimated delivery: 7–12 business days to Australia. A tracking number is provided within 2 business days of dispatch. Both bottles arrive in protective packaging — liquids are sealed and safe for air transport.

Frequently asked questions

Do I really need both a toner and a serum?

They do different jobs. The toner is mostly about water-light hydration and prepping the surface so the serum absorbs properly; the serum carries the concentrated fermented actives, ceramide and hyaluronic acid. You can use either one on its own, but the reason this is sold as a set is that the toner makes the serum work better. Toner floods the skin with moisture, and hydrated skin lets active ingredients sink in instead of beading on a dry surface.

How quickly will I see a difference?

Hydration and a smoother, dewier finish are usually visible within the first week or two of twice-daily use. A more even, comfortable texture builds more slowly as fermented actives and barrier ingredients accumulate their effect over roughly 4–8 weeks, in line with the skin's natural 28–56 day renewal cycle. Consistency matters far more than quantity here.

I have sensitive skin — is this gentle enough?

Both products are formulated around hydration and fermented actives rather than harsh acids, and the panthenol helps buffer reactivity. As with any new routine, patch-test on the inner forearm for 48 hours before applying to the face. If you have a diagnosed skin condition or are unsure how a new product fits your routine, check with your dermatologist first.

Can I add this to a routine I already have?

Yes. Slot the toner in right after cleansing and the Meriquid serum directly after the toner, before any cream, oil, or SPF. It layers cleanly with most existing products. If you use retinol, apply the serum first, let it absorb, then layer retinol on top — the fermented and barrier base helps keep skin comfortable alongside it.